彩票易购网网

profile bending machine

Profile bending machine
Angle & Section Bending Machine
Manufacturer

Home >> Section Bending Machine

Section Bending Machine

How to choose?

彩票易购网网 Please find the right model according to the maximum bending sectional modulus of profiles in the following parameter table.

The main parameters on form means the max. bending capacity with best working efficiency. If other steel profile like square, angle, only if the bending sectional modulus less than 75 cm3, then it is available to finish bending on this 75.learn more: What is the section modulus

You can also choose the required model according to the bending material: (square steel), , (flat steel), , , , , , ,

Model

Section Bending Machine Specification

 164575140180250320400500600
angle bending machine for flat steel cul-turnMax.Section(mm)80x10100x25120x25150x30175x40200x50250x70250x70300x70300x80
Min.bending DIA(mm)Φ800Φ700Φ1000Φ1500Φ1500Φ2500Φ3500Φ3500Φ4000Φ5000
angle bending machine for flat steel out-turnMax.Section(mm)180x20200x35250x30250x40350x50400x60450x70500x80500x100650x100
Min.bending DIA(mm)Φ1500Φ600Φ1000Φ1000Φ900Φ2000Φ1000Φ1200Φ1600Φ2000
angle bending machine for square steelMax.Section(mm)50x5060x6070x7080x80110x110130x130145x145165x165200x200240x240
Min.bending DIA(mm)Φ500Φ600Φ800Φ1500Φ1600Φ2000Φ2500Φ3000Φ3500Φ4000
angle bending machine for steel round tubeMax.Section(mm)Φ76x4Φ102x4Φ140x4Φ170x6Φ219x6Φ245x6Φ325x6Φ400x6Φ452x6Φ510x20
Min.bending DIA(mm)Φ700Φ1000Φ1800Φ2000Φ2500Φ3000Φ4000Φ8000Φ8000Φ10000
angle bending machine for steel square tubeMax.Section(mm)65x65x690x90x5100x100x6120x120x8150x150x8180x180x10200x200x10250x250x12300x300x12350x350x12
Min.bending DIA(mm)Φ1000Φ1500Φ2000Φ3000Φ5000Φ6000Φ8000Φ10000Φ15000Φ30000
angle bending machine for L steel&angle steel cul turnMax.Section(mm)80x80x10100x100x12120x120x12140x140x14160x160x20180x180x12200x200x20200x200x28200x200x30200x200x30
Min.bending DIA(mm)Φ1000Φ1200Φ1500Φ1500Φ1800Φ3000Φ4000Φ4000Φ4500Φ4500
angle bending machine for L steel&angle steel out turnMax.Section(mm)80x80x10100x100x12120x120x12140x140x14160x160x20180x180x12200x200x20200x200x28200x200x30200x200x30
Min.bending DIA(mm)Φ1500Φ2000Φ2000Φ2500Φ3000Φ4000Φ4500Φ6000Φ8000Φ8000
angle bending machine for channel steel&U steel cul turnMax.Section(mm)120140200300360450500550600700
Min.bending DIA(mm)Φ600Φ600Φ1000Φ1200Φ2000Φ2500Φ3000Φ4000Φ5000Φ6000
angle bending machine for channel steel&U steel out turnMax.Section(mm)120140200300360450500550600700
Min.bending DIA(mm)Φ600Φ600Φ1000Φ1200Φ2000Φ2500Φ3000Φ4000Φ5000Φ6000
profile bending tee steelMax.Section(mm)80x80x980x80x10100x100x10130x130x15150x150x20180x180x20200x200x20250x250x30300x300x30350x350x35
Min.bending DIA(mm)Φ700Φ800Φ1000Φ1500Φ2000Φ3000Φ3000Φ4000Φ4000Φ5000
profile bending universal beamMax.Section(mm)120140200300360450500550600700
Min.bending DIA(mm)Φ600Φ600Φ1000Φ1200Φ2000Φ2500Φ3000Φ4000Φ5000Φ6000
profile bending universal columnMax.Section(mm)  120160200240320400450500
Min.bending DIA(mm)  Φ4000Φ6000Φ9000Φ15000Φ32000Φ35000Φ40000Φ40000
Sectional modulus cm310-2016-4545-7575-140140-180180-250250-320320-400400-500500-600
Motor power5.511111518.52230373745

WQJ-400/WQJY Profile bending machine Specification

 
Max.Section(mm):50x1080x1530x30 Ø30 1½"x2.9Ø60x1.550x30x340x340x40x535x35x550x650x6
Min.Section(mm):20x630x610x10Ø10¼"x1.8Ø25x1.540x20x230x230x30x430x30x420x320x3
Description

The Section Bending Machine is a special equipment specially designed for bending and forming of profiles. It can bend metal profiles such as angle steel, flat steel, channel steel, steel pipe, profiled steel, etc. into a cylindrical shape without changing the cross-section characteristics. Or spiral workpiece.

Depending upon your unique project requirements, Profile Bending angle bending may be performed on a variety of , including , , , , and copper.

BIT section bending machine is designed for bending all types of profiles, Our Angle Roller ( Profile Bending Machine ) only needs one set of assembly mould, can bending angle steel, channel steel, flat steel, square steel, square tube, U type, I type, T type, L type , flat and round profiles and pipes, this type of machine can handle a variety of special parts.

More Information of ;

With the international advanced technology, programmable digital control by PLC, all hydraulic drive. This series section bender dedicated to the small straight adge and high precision bending design, profile bending roll feeding can finish by one time for pre-bending section, roll and inspected. Its structure is advanced, short bending straight edge, high precision bending profiles.

Advantage

• Reasonable weighted host

彩票易购网网The main frame of all BIT section bending machines is welded.

彩票易购网网Machining and wire drilling steel structures using the heaviest components of any type of machine to increase strength and stiffness and eliminate frame stress design.

 • Maximum shaft diameter and bearing size

The roll shaft is made of high-strength chrome-nickel alloy steel and is the largest diameter shaft of any type of machine. Rolling tools use super-large roller bearings for increased efficiency and longer life. The standard tool is a combination kit for bending and bending, flat bars on the plane and edges, T-bar cutting and cutting in and down, small square bars and even small solid round bars. Usually, no extra gaskets are needed.

• Highest drive torque and speed

The BIT profile bending machine offers the largest drive torque in any class of machine. A larger drive torque means that the profile can usually be rolled with fewer passes, which usually results in less deformation of the profile being rolled. Always drive all three rolls. All models typically have a speed of 7 m / min and are more functional than other similar machines.

• Maximum bending roller force

The two lower rollers are individually adjusted by a hydraulic cylinder. The size of the rolls allows the BIT profile press to produce a greater bending force than any similar machine, providing maximum profile modulus.

• The most powerful guide roller

彩票易购网网The BIT profile bending machine has the largest and most powerful guide roller on the market. In this way, they can stand out from the most promising parts of the machine's capabilities. Each model comes standard with hardened steel guide rolls, including “leg-type” guide rolls.

Application

彩票易购网网Curved steel structure construction, airport, stadium arc engineering, doors and windows, curtain wall, handrail lighting ceiling, balcony engineering, grid, packaged cylindrical skeleton, packaged cylindrical skeleton, environmentally friendly vegetable greenhouse, shower door, production line arc, satellite Antennas, telephone booths, metal furniture, fitness equipment, display road noise barriers, guard railroads, road tunnel skeletons and many other industries.  

About Us

Nantong Borisbang Industrial Technology (NBIT) rooted in Haian County of Jiangsu Province,China. The main production . NBIT was founded in 2001 and has more than 17 years experience in this field.

彩票易购网网Nantong Borisbang Industrial Technology (NBIT) is your specialist and technology partner for powerful and future-proof bending machines and bending solutions.Having a solid trained technical team with a wide range of quality Section Bending Machines, and On-Time Deliveries, we have been accumulating happy customers worldwide.

Our core focus and specialisation is in the Section Bending Machines.

彩票易购网网Over the years, the Company has grown multifold and currently exports to several countries in Sweden, Germany, England, Thailand, Iran, Korea, Vietnam, Russia, Malaysia, Dubai, Saudi, Arabia, India, South Africa, United Arab Emirates, Singapore, Uzbekistan.